На главную
Результаты поиска “Home shop equipment mobile base plan”
Build a Mobile Shop Cart - Planer Stand
 
05:42
Get $5 your first purchase by entering APRIL at checkout! http://hrys.co/april For a written tutorial check out my blog at http://wilkerdos.com/2015/12/build-a-mobile-shop-stand-planer-stand/ Follow me on Facebook at https://www.facebook.com/wilkerdos Instagram: https://www.instagram.com/wilker_dos/ Patreon: https://www.patreon.com/user?u=257047 For a set of plans click here http://wilkerdos.com/product/mobile-shop-stand-plans/ For more information on Triton Tools, check out: http://www.tritontools.com/en-US Here is a tutorial on how to build a mobile shop stand. I will be using this shop cart to store the Triton Planer and Spindle Sander. I have step by step plans on how to build this stand on my website. Things I used: Planer: http://goo.gl/xFyFJg Spindle Sander: http://goo.gl/7nC4Pd Multi Stand: http://goo.gl/xIu3OY Dust Right Collector: http://goo.gl/Emy9Lw Rockler Clamp: http://goo.gl/nCwqoG Glue Bottle: http://goo.gl/z5RzEP Push Blocks: http://goo.gl/HzeK3R Casters: http://goo.gl/MOYgaJ and http://goo.gl/03T5XB Pocket Hole Jig: http://goo.gl/vTCNRx Bandsaw: http://goo.gl/bfNmvM
Просмотров: 347890 April Wilkerson
Homemade mobile base for a drill press
 
02:12
This is a base I made for my drill press to easily move it around the shop. It could easily be adapted to fit other power tools.
Просмотров: 26509 Robert Hart
How to Build a Utility Cart - This Old House
 
07:56
This Old House general contractor Tom Silva transforms one sheet of plywood into a hold-all, easy-roll cart. (See below for a shopping list and tools.) Click here to SUBSCRIBE to the official This Old House YouTube channel: http://www.youtube.com/subscription_center?add_user=thisoldhouse Full episode: https://www.youtube.com/watch?v=uJx52yMjwWA&list=PLkJADc1qDrr-ZmCu0t_YNmTXHVt80JDyE&index=22 How to Build a Tool Storage Cabinet: https://www.youtube.com/watch?v=WBT7K71IAow&list=PLkJADc1qDrr_0NxtmzECiOWkr5de82kXV&index=111 How to Build a Cedar Storage Bench: https://www.youtube.com/watch?v=Pg-QHu29W4w&index=83&list=PLkJADc1qDrr_0NxtmzECiOWkr5de82kXV How to Build Walk-In Closet Storage: https://www.youtube.com/watch?v=kwc-9mFSmm0&list=PLkJADc1qDrr_0NxtmzECiOWkr5de82kXV&index=113 Shopping List for Building a Utility Cart: - 3/4-inch A-C fir plywood - four 2 1/2-inch casters (two fixed, two swiveling) - pocket screws - carpenter's glue - 1-inch-diameter hardwood dowel - sixteen 5/16-inch-diameter x 1 1/2-inch-long carriage bolts, nuts and washers Tools for Building a Utility Cart: - circular saw - straightedge guide - miter saw - drill/driver and 1-inch-diameter spade bit - pocket hole jig - cordless finishing nailer and 1 1/2-inch nails - router with 1/2-inch-diameter straight-cutting bit - assorted clamps - ratcheting socket wrench Follow This Old House: Facebook: https://www.facebook.com/ThisOldHouse Twitter: https://twitter.com/thisoldhouse Pinterest: http://www.pinterest.com/thisoldhouse/ G+: https://plus.google.com/+thisoldhouse/posts Instagram: http://instagram.com/thisoldhouse Tumblr: http://thisoldhouse.tumblr.com/
Просмотров: 678674 This Old House
How to Build a Base Cabinet with Drawers | DIY Shop Storage
 
09:44
The perfect project to add garage / shop storage, I show you how to build a base cabinet with drawers. This DIY base cabinet will take organization in your workshop to the next level BLOG: fixthisbuildthat.com/how-to-build-a-base-cabinet-with-drawers-diy-plans BUILD PLANS with cut list and step by step instructions: https://gum.co/basecabinet Thank you to Kreg Tool for sponsoring this video! - http://amzn.to/2y0xGXK ======= Tools/Supplies Used (affiliate): Kreg Conceled Hinge Jig - http://amzn.to/2sXJ2Ja Kreg Accu-Cut - http://amzn.to/2wHywsi Kreg Drawer Slide Jig - http://amzn.to/2xBjZxi Kreg Cabinet Hardware jig - http://amzn.to/2xqur8O Kreg K4 Pocket Hole jig - http://amzn.to/1KPqbDa Kreg R3 Handheld Pocket Jig- http://amzn.to/1Dsvbej Kreg Deep Face Clamp - http://amzn.to/2mOiWBm Kreg Right Angle Clamp - http://amzn.to/1IWHK3I Kreg 1.25" Screws - http://amzn.to/1Ep6QBm KREG 4' top track - http://amzn.to/1P0S9O3 Kreg adeisive tape measure - http://amzn.to/1Hfthdq Kreg Swing Stop - http://amzn.to/1PXSOPC Kreg Stop Block - http://amzn.to/1P0SfFl 22” Drawer Slides - http://amzn.to/2ylQHQo 110 deg euro hinge - http://amzn.to/2xy5eLs Flush cut saw - http://amzn.to/2lq9is7 Parallel Clamps - http://amzn.to/2oLsuis Table Saw - http://amzn.to/2prd9nA Trim router - http://amzn.to/2xw9CdP 18ga brad nailer - http://amzn.to/2fIlaBr Glue bottle - http://amzn.to/2g67duY Random Orbital Sander - http://amzn.to/2ssLsOV Respirator - http://amzn.to/2q8lNXt Water Based Polyurethane - http://amzn.to/2nnstDd ======= Join the Builder Club on Patreon and get Free Build Plans! https://www.patreon.com/fixthisbuildthat ======= SUBSCRIBE to my channel here: https://www.youtube.com/c/fixthisbuildthat?sub_confirmation=1 ======= FOLLOW ME on Social Media: Instagram - http://www.instagram.com/fixthisbuildthat Facebook - http://www.fb.com/ibuildthat Twitter - http://www.twitter.com/fixthisbuildtht Pinterest - http://www.pinterest.com/fixthisbuildtht ======= Brad Rodriguez PO Box 680433 Franklin, TN 37068
Просмотров: 415266 Fix This Build That
Project - Build a quick and easy stand for your shop tools
 
08:14
In this video I show you how I made a stand for my bandsaw out of 4 - 2x4's. Plans available on my website. http://www.funwithwoodworking.com/ ---------------- Please click subscribe and never miss a video! http://www.youtube.com/subscription_center?add_user=funwithwoodworking Website: http://funwithwoodworking.com Facebook: http://facebook.com/funwithwoodworking Keek: http://keek.com/funwithwoodworking Twitter: http://twitter.com/funwithwoodwork ---------------- Music by Dan-O at http://danosongs.com Licensed under a Creative Commons license: http://danosongs.com/danosongs.com-li...
Просмотров: 108862 FunWithWoodworking
Making a Portable Workshop - Part 1
 
08:34
A Portable Workshop for those of you that don't have much space and a compact cabinet you can store and carry all your stuff to work in other locations. More info and plans: https://www.paoson.com/en/shop-woodworking-plans/49-portable-workshop.html Where to get some materials and tools used in this project: Clampling Collar Router: http://bit.ly/2Op7dqZ Circular Saw and Accessories: http://bit.ly/2vvcLcj Jig Saw and Accessories: http://bit.ly/2M80WmK Sander and Sandpaper: http://bit.ly/2M2pzRQ Drill Press Stand: http://bit.ly/2AVahcv Drill Bits and Router Bits: http://bit.ly/2M8sqbl Threaded Inserts and Screws: http://bit.ly/2ASnUJm Spray Adhesive and Glue: http://bit.ly/2KGv17H 2 Position ON/OFF Switch/Emergency: http://bit.ly/2OW3rX9 T-Track and Accessories: http://bit.ly/2AX0inc Drills & Accessories: http://bit.ly/2KFpj5F Varnishes and Spray Lacquer: http://bit.ly/2ARYBr https://www.paoson.com/forum/22t/where-can-i-find Follow me on Instagram: https://www.instagram.com/paoson_woodworking/ Follow me on Facebook: https://www.facebook.com/paosonwoodwork/ Music: www.bensound.com
Просмотров: 1840711 Paoson WoodWorking
Tool Stand Plans
 
01:50
http://gardenplansfree.com/storage/tool-stand-plans/ SUBSCRIBE for a new DIY video almost every single day! If you want to learn more about how to build a tool stand, we recommend you to pay attention to the instructions described in the video. Select the right tool stand plans for your needs and invest in high-quality materials.
Просмотров: 517 HowToSpecialist
Making My Kitchen Island - With LOTS of Storage!
 
17:16
Here's a different design- https://youtu.be/4RMXEjGS1Fw Building your own furniture is great, not only do you get to enjoy something you made, but you also get to completely customize it to your every need. With this project I did just that, I used common materials that where readily available and inexpensive, sized it to fit my kitchen perfectly and built in a ton of storage which created a much more functional kitchen. The entire island can be made from materials from you local hardware store. While a lot of tools and materials where used to build mine, other tools and techniques can be substituted to make the project suit your skill level and available equipment. While I use a soft wood and paint the base in the end, you can use any wood you'd like and finish the base with paint, stain or any finish you prefer. This was an especially satisfying project for me, being the largest project I've built in the new shop and most involved video I'm made so far. I hope you all enjoy the video. Let me know if you have any questions and if you don't mind, share the video on your social media! It was a lot of work and I'd like it to be available to as many people as possible. Thanks again. Facebook- https://www.facebook.com/The-Homestead-Craftsman-151656998374912/?ref=hl All Music is performed by Josh Woodward, check him out! "Creative Commons Attribution music by Josh Woodward" Main Site- http://www.joshwoodward.com/ Song Links- http://www.joshwoodward.com/song/IllBeRightBehindYouJosephine http://www.joshwoodward.com/song/Hey http://www.joshwoodward.com/song/WaterintheCreek
Просмотров: 327411 The Homestead Craftsman
Single-Action Retracting Casters for a Mobile Welding Table
 
11:02
I fabricated a custom, mobile base for my new CertiFlat welding table and equipped it with casters that extend and retract with the press of a single foot pedal. See how I integrated a locking mechanism: https://youtu.be/okyl5C9wGiI Help support my channel by using this link to make a purchase at CertiFlat: http://weldtables.com/#_l_q0 Instagram: https://www.instagram.com/wesley_treat Amazon: https://www.amazon.com/shop/wesleytreat Etsy: https://satelluxe.etsy.com & https://satelluxestudio.etsy.com TOOLS & MATERIALS FEATURED IN THIS VIDEO ▶ 4 in. PVC Heavy Duty Swivel Caster: https://goo.gl/rbPwb9 ▶ Uxcell Sealed Ball Bearings: http://amzn.to/2yRSY6A ▶ Heavy Duty Leveling Mounts: https://goo.gl/opVv2K ▶ 3M Virtua CCS Protective Eyewear: http://amzn.to/2l5EITE ▶ Millermatic 211 MIG Welder: http://amzn.to/2gJtFgI ▶ Milwaukee Step Bit 3-Piece Set: http://amzn.to/2yV6qa1 ▶ Dixon Reach Deep Hole Pattern Marker: http://amzn.to/2A8aTKz
Просмотров: 132215 Wesley Treat
MODULAR 5 in ONE MULTI workbench turns a bedroom into a workshop WITHIN MINUTES
 
16:01
We are living in an apartment based on two floors. There is neither a basement nor a garage or a free room where I can do my woodworking. Two years ago I finished turning our attic into a living zone with a big open space living room a kitchen and a small office. We moved up stairs and all the rooms of the lower floor have been turned into bed rooms. The last free room left, its the room where I build the tinywoodworkshop by the way, is now turning into a dream-sleeping room for my younger son. I knew from the beginning if I am not able to come out with some great idea of, how to continue making stuff without having a dedicated workspace, my DIY career will be over. I desperately needed a soluten, I knew that this solution has to become something - mobile which I can move around inside our apartment, - it has to be very compact, kind of a folding solution, because there is not much space left for storage - it has to be modular, and extendable, because I need as much functionality as possible - it has to be clean, because I will have to use it inside the bedroom. So I've ended up with this tinywoodworkshop. - It is mobile, so i can take it wherever i want, - it is compact once it is folded up it does not need much space any more. - it is multifunctional and extendable, which means I can use it as a table saw, as a router table, an upside down mounted jig saw with a super flexible blade guide which works a bit like a band saw. I can use is as a sanding station and with a circular saw based simple jig I am even able to joint lumber. - its clean, a modular dust collection above and below the table top help to keep the working-zone super clean. I did not know, if the concept of an all-in one workstation with an integrated dust collection will ever work out inside a bed room, until I tried it out. The project, a screw-less hammock stand, was the first project I made with the tinywoodworkshop. The day before I got my second shop vac. Splitting up one shop vac is not enough. But when I made the first cuts with the table saw, I knew, that I have found my way to continue making stuff. How I made the tinywoodworkshop? The build happend inside the last free room of our apartment, which I am turning now into a bed room for my younger son. In the beginning I had a very rough concept in mind of what I wanted to build. I knew that I wanted to work with various machines. The best solution which came into my mind was, having them mounted on insert plates and cutting an opening for these plates. Once I was finished with the table top I wrapped my head around the folding mechanism and the concept, of having a mobile cart, where the folding table-top is mounted on. Then I started to think about the dust collection underneath and above the table-top. This was the hardest part. I knew very well the mess which is created by a table saw, being used without a dust collection. I think two cuts without a dust collection inside the bed room would be enough and you gonna find dust even inside your wardrobe between your clothes. Underneath the table I created a box which can be taken completely apart and above the table top there are various types of hoods. The final step was building all the supports and accessories. I developed my own solution for cross cutting which I call the "crosscut push bar", and I found a quite flexible way to replace feather boards, I am calling it the "bench super flex flat bar". All the accessories and insert plates with the machines are stored on a shelf unit. The shelf unit finds its place on the mobile cart with the folding table top. At the end the tinywoodworkshop is a compact unit which can easily be stored inside our old kitchen room. I am currently going through a learning curve with this equipment - learning by doing. This is the first prototype and there are certainly still a lot of improvements to be done. One of the main concepts of the tinywoodworkshop is, having an extendable workshop, so I will extend the feature set of it. Down the line I will take care of this and I will share this amazing journey here on YouTube. This Video is dedicated to all the amazing and ambitious people out there who like to make stuff. There is always a way, NEVER STOP THINKING! Reference-Links of the Tool used in the Video https://www.mymicrobalance.com/en https://play.google.com/store/apps/details?id=com.mymicrobalance.app
Просмотров: 84790 the tinywoodworkshop
5 Tips For A Small Wood Workshop - making the most of your space
 
07:18
Five tips for making the most of the space in your small workshop. Here are links to the other workshop project videos I mentioned: Making a stand/mobile base for the electric planer http://www.youtube.com/watch?v=VP0X7FWCZu0 Making a workbench http://goo.gl/Z521Dk Making a mitre saw station part 1 http://goo.gl/s4vtvC Making a mitre saw station part 2 http://goo.gl/4N4iX5 Thanks for watching! Please subscribe! http://www.ragnbonebrown.com http://www.etsy.com/uk/shop/ragnbonebrown/ http://www.facebook.com/ragnbonebrown http://twitter.com/ragnbonebrown Email: ragnbonebrown@gmail.com Music by The Beelips: https://soundcloud.com/thebeelips
Просмотров: 401024 Rag 'n' Bone Brown
Mobile tool stands
 
10:24
Making two bandsaw stands and a stand for the pantorouter, http://woodgears.ca/tool_stand/stands.html I have been using this same design for most cabinets that I built since inventing the screw advance box joint jig.
Просмотров: 391023 Matthias Wandel
Homemade 4 in 1 Workshop (table saw, router table, disc sander jigsaw table) 4 in 1Çalışma İstasyonu
 
04:36
Homemade table saw, roter table, jigsaw table and disc sander all in one..! El yapımı tezgah testere, disk zımpara makinası, freze tezgahı ve dekupaj testere tezgahı hepsi bir arada.. Box dimensions: 54x32x88 and table 65x98 cm. Plywood thickness of box 10 mm table 18 mm. Disc sander diameter 180 mm Kutu boyutları: 54x32x88, tabla 65x98 cm. Kutu kontrplak kalınlığı: 10 mm tabla kalınlığı: 18 mm. Disk zımpara ölçüsü: 180 mm Music Elektronomia - Energy [NCS Release] https://www.youtube.com/watch?v=fzNMd3Tu1Zw Elektronomia • https://soundcloud.com/elektronomia • https://www.youtube.com/c/elektronomia • https://www.facebook.com/Elektronomia Jim Yosef - Firefly [NCS Release] https://www.youtube.com/watch?v=x_OwcYTNbHs ▽ Follow Jim Yosef SoundCloud https://soundcloud.com/jim-yosef Facebook https://www.facebook.com/jimyosefmusic YouTube https://www.youtube.com/user/Jimboows
Просмотров: 1630604 Gökmen ALTUNTAŞ
How To Make A Workbench With Casters Lifting Mechanism
 
09:24
In this video I'll make a workbench on casters with simple casters lifting mechanism. I used pallets reclaimed wood. Long time my temporary workbench was a pile of pallets. Now it's time to make a real workbench! Support Well Done Tips on Patreon: https://www.patreon.com/welldonetips Due to factors beyond the control of WellDoneTips, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. WellDoneTips assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. WellDoneTips recommends safe practices when working with the tools or equipment seen or implied in this video. Due to factors beyond the control of WellDoneTips, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not WellDoneTips.
Просмотров: 46144 Well Done Tips
How To Build A Shed Floor
 
08:22
http://howtobuildashedeasily.com/MYSHEDPLANS ← Click the link for your FREE Shed Plans, Start building your new SHED today... For homeowners who are planning a shed project, starting with a solid shed floor is an absolute must. Without a sturdy floor, the shed itself will lack the overall strength and support that is necessary to be safe and long lasting. http://howtobuildashedeasily.com ← Click link to visit my Blog, for great article and video's to FREE Shed Plans and Step by Step detailed Instruction's.. Build A Shed Floor Shed Floor how to build a shed floor how to build a floor for a shed how to build a storage shed floor shed floor plans building a shed floor shed floor framing storage shed floor plans storage shed floor
Просмотров: 2258198 How To Build A Shed
Easy CNC Equipment Moving with DIY Machine Skates
 
08:38
Home shop machinists often run into the problem of trying to move heavy equipment around in their garage. Professionals do this with forklifts and machinery skates. In this video, I demonstrate some shop-made machine skates being used to maneuver a 5500lb lathe around. The skates are easily made and can transform a heavy machine from being an immovable object to something that one person can push around! I've learned the hard way - pushing things around on round bars, prying with 6' levers, soaping the concrete, and renting forklifts. When it comes to arranging equipment _inside_ a shop, this is now my favorite way to do it. It should go without saying, but moving big equipment can kill you if you don't use your head and think things through. Be safe and enjoy! A lot of people have asked which bearings to use and where to get parts. I tried to find the best deal on amazon for the parts I used. The links below are all affilate links: Parts: R10 Bearing: http://amzn.to/2huipEb R10 Bearings 50 pack, enough to make a lot of skates: http://amzn.to/2A1r8sS Axles (5/8" W1 Drill Rod): http://amzn.to/2yJBDg6 Ready-made skates: 3300lb skate for $40: http://amzn.to/2hvNxTY Hilman Rollers 8 ton kit for $1200: http://amzn.to/2hvnJHK
Просмотров: 330613 amaedesign
Flip Top Tool Stand for Planer & Spindle Sander | DIY Woodworking Storage
 
03:06
This Flip Top Tool Stand is the perfect station for your planer, sander, miter saw, or any other benchtop tool. Shop workstations should serve double duty and this one does! Blog & Plans: http://fixthisbuildthat.com/diy-flip-top-tool-stand-plans/ __________ SUBSCRIBE to my channel here: https://www.youtube.com/c/fixthisbuildthat?sub_confirmation=1 __________ I'd love your support on Patreon! https://www.patreon.com/fixthisbuildthat __________ FOLLOW ME on Social Media: Instagram - http://www.instagram.com/fixthisbuildthat Facebook - http://www.fb.com/ibuildthat Twitter - http://www.twitter.com/fixthisbuildtht Pinterest - http://www.pinterest.com/fixthisbuildtht __________ Music: http://www.bensound.com
Просмотров: 97212 Fix This Build That
What You Need for Your Fabrication or Welding Shop - Kevin Caron
 
09:29
From http://www.kevincaron.com - Artist Kevin Caron shares what you need to get started with your own welding or fabrication shop .... Caron runs through the must-have items for your own shop or art studio: 1) A METAL WORK TABLE. A metal table is best, but some people use a wooden table with a metal surface on it. Caron prefers a metal table that is easier to make level and even, and that won't warp. Still, one colleague uses a stump with a 1/2" piece of steel plate on it. The stump is hollowed a bit so he can take off the metal and use the stump for shaping. That's the sort of ingenuity you can use while creating your shop. 2) A WELDER. Caron shows two options, a MIG welder and an arc welder. For the MIG welder, he shows Longevity's MigWeld 140, which runs on 110, uses solid core with inert gas for cleaner welds, or it also runs flux core, which uses no gas and can be used outdoors. The MIG is great for thinner metal and is easier to learn. This model starts about $325. The Lincoln arc welder, or "buzz box" or "tombstone welder," is another option. You can pick one up at a big box store for $500 - 600. It's better for welding thicker metal and welding outside in the wind. It does require 220 amp service, though. 3) A HELMET. You need a welding helmet with a dark shade, a 9, 10 or 11, depending upon your eyes, where you are welding and what you're welding with. There are auto-darkening and fixed shade helmets, too. 4) GLOVES. Caron recommends having two types: some MIG or stick (arc) welding gloves, which are thick, well-insulated and have gauntlets; and a pair of lighter gloves for when you're cutting, grinding, etc. The work gloves protect your hands, but you have some tactile feel, unlike the welding gloves, which are like wearing oven mitts. 5) A MEASURING DEVICE. A tape measure, yard stick, the span of your hand if you know its width, a piece of string - something you can measure with. 6) SOME SORT OF MARKER. Caron shows a soapstone marker, which you can get at a welding supply store, at Harbor Freight or at Home Depot in their welding department. You can also use a magic marker, a Sharpie, a pencil or a pen (although pens don't last long), even a scribe that lets you make a good sharp line. 7) A LEVEL. You need something to make things square and straight. The one he shows has magnets that let you attach it to the metal, but there are all sorts of sizes, shapes and types. 8) CLAMPS. Caron shows vice grips for smaller work and Bessey clamps, with their deeper throats. He says he's even used woodworking clamps at times. There are many, many different types and styles of clamps. 9) A HAMMER. You'll need a decent sized hammer, a 16-ounce or so. You need a ball peen hammer, not a carpenter's hammer, not a claw hammer. Get one with a flat pounding surface. Once you're done welding, there's always a little clean up to do, so you'll need .... 10) A 4-1/2" ANGLE GRINDER. You can use soft pads, which come in various grits and styles and last a long time. You can also use the grinder for .... 11) A CUT-OFF TOOL. Just take your grinding pad off of your angle grinder and put on a cut-off wheel so you have a tool you can cut with. You can also use a hacksaw for cutting. 12) SOME PLACE TO SHAPE THINGS. You may not want to run out and buy an anvil right away, but, as Caron points out, you probably have something around you can use, such as a stump, a bumper, even a trailer ball hitch. These items will get you started. Then, as you continue to work, you'll better understand what your space will hold, what you want to be doing, what your budget will allow. Caron says, "Have fun, and let me know how it's going." See more how-to videos and see and hear Kevin's work at http://www.kevincaron.com
Просмотров: 178020 Kevin Caron, Artist
How to make a Standing Desk
 
12:22
The first 100 people to sign up to Blinkist with this link are going to get a 1-week free trial http://www.blinkist.com/diycreators - you'll also 20% off if you want the full membership! DIY Standing Desk / Adjustable and mobile **********Ways to Support What I do ********* Grab a Shirt here http://bit.ly/2GoIGhm Support Diy creators here: https://www.patreon.com/diycreators Downloadable PDF plans https://gumroad.com/diycreators Find me on Social media Instagram: https://instagram.com/morediycreators Facebook: https://www.facebook.com/diycreators For more video Subscribe & "RING the Bell": http://bit.ly/1PtWJEd ---------------------------Materials Used------------------- Plans now available @ https://gumroad.com/diycreators (8) 1in. by 4in. by 39in. (1) 1in. by 12in. by 6ft (1) Plywood 48in by 48in By 3/4 Wood Glue https://amzn.to/2u7tYqK Caster https://amzn.to/2tWkLT7 Bolt 6in - 5/16 bolt 5/16in Round Knob USB Outlet https://amzn.to/2u6Zaq9 ---------------------------- Tools Used---------------------- RZ-Mask http://rzmask.com?afmc=8i Use promo code DIYCreators to get 15% off. 12in wing compass https://amzn.to/2tWzLk2 Table Saw https://amzn.to/2KGCMhV Miter saw https://amzn.to/2IYCMFa Bandsaw https://amzn.to/2NoCpXD Router https://amzn.to/2KO1rOc Sander https://amzn.to/2tYNk28 Drill press https://amzn.to/2NsQ6oK Nail gun https://amzn.to/2zbAinf Drill https://amzn.to/2lVVmok Countersink bit https://amzn.to/2NqgiQJ Clamp https://amzn.to/2lU3Sny Jigsaw https://amzn.to/2No8QFE Pocket https://amzn.to/2tVnmfY ----------------Camera and recording equipment I use ------- Recording Camera - Nikon D5500 - http://amzn.to/2qTajaY Mic to record to computer - http://amzn.to/2qTtAZO Mic to Record to the Camera http://amzn.to/2CQ9xBk Lighting http://amzn.to/2ozoNxR SD Card http://amzn.to/2oHfsDr Camera Slider http://amzn.to/2ERyYEi Software Adobe Premiere (Video Edit) Adobe Photoshop (Photoshop) Sketchup (3D Modeling software) You can see my complete kit list here https://kit.com/Diycreators/video-recording-gear
Просмотров: 154531 DIY Creators
DIY Drill Press Stand with Storage | How to Build
 
08:42
How to build a DIY Drill Press Stand with tons of shop storage. The drill press cabinet has five drawers to hold all your woodworking accessories for the drill press like bits, clamps, vises, etc. Learn how to make it from just 1 sheet of ¾” plywood, just over a half sheet of ¼” plywood and a little hardwood. The drill press stand plans are available through my website. BLOG & PLANS: http://fixthisbuildthat.com/diy-drill-press-stand-plans ➤Thank you to JET Power Tools for sponsoring this video!: Check out the JET 12” Drill Press: https://amzn.to/2JHJdBE ➤Tools/Supplies Used (affiliate): JET 12” Drill Press - https://amzn.to/2JHJdBE JET Parallel Clamps - https://amzn.to/2KyCl9W ISOtunes Bluetooth Earbuds - https://amzn.to/2Ioq0UI Miter Saw Stand - https://fixthisbuildthat.com/mobile-miter-saw-station/ Pocket Hole Jig - https://amzn.to/2KE0egn Drawer Slides - https://amzn.to/2Nvzi03 Cabinet Hardware jig - https://amzn.to/2tZrtrj RIDGID 18V Router - https://amzn.to/2KDooHW How to Make Easy Drawers - https://youtu.be/Ilda2kqORZI ➤SUBSCRIBE to my channel here: https://www.youtube.com/c/fixthisbuildthat?sub_confirmation=1 ➤Join the Builder Club on Patreon and get Free Build Plans! https://www.patreon.com/fixthisbuildthat ➤FOLLOW ME on Social Media: Instagram - http://www.instagram.com/fixthisbuildthat Facebook - http://www.fb.com/ibuildthat Twitter - http://www.twitter.com/fixthisbuildtht Pinterest - http://www.pinterest.com/fixthisbuildtht
Просмотров: 76324 Fix This Build That
How to Start a Pizza Business in 2017
 
03:54
Starting a Pizza business is indeed profitable business ideas for 2017. Before starting your own pizza business you have to get training and enough qualified. Learn how to start a pizza business in 2017. #foodbusiness #smallbusinessideas #pizzbusiness #2017 Thanks for watching! Born For Entrepreneurs http://bornforentrepreneurs.com How to Start a Pizza Business in 2017
Просмотров: 29354 Born For Entrepreneurs
How to Use a Manual Tire Changer - Harbor Freight
 
11:16
Here is a video on how to use a portable tire changer made by HF. Also some tips and advice on how to install it. If you liked this video you may also find these other video's useful: Get this Tire Changer Cheaper on Amazon: http://amzn.to/2aCf7JF How to test an alternator: http://youtu.be/5DdCNzge_s0 How to Test a Car Battery: http://youtu.be/Km6MNRYeEEY How to Find a Parasitic Draw: http://youtu.be/eXX8TfzRAKk How to Replace an Alternator: http://youtu.be/VaquYn944aU If this video helped you out please don't forget to subscribe, give it a thumbs up or if you are feeling generous leaving a tip by clicking the " i " button on the top left corner of the screen. Thank you very much for your support! Due to factors beyond the control of Ratchetsand Wrenches, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Ratchetsand Wrenches assumes no liability for any property or personal damage that may arise from doing a repair on your vehicle after watching any of my repair video's. Due to factors beyond the control of Ratchetsand Wrenches, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Again Any injury, damage or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user and not Ratchetsand Wrenches.
Просмотров: 936343 Ratchets And Wrenches
DIY LED Lamp with a CONCRETE base (Controlled it with A Mobile App)
 
11:53
DIY wood in CONCRETE LED floor LAMP Use my link and Get a free 30-day trial & download a free title at http://audible.com/diycreators or text diycreators to 500-500. Sponsored by Audible: View all my plans: https://gumroad.com/diycreators Help me make more videos: https://www.patreon.com/diycreators Find me on Social media Instagram: https://instagram.com/morediycreators Facebook: https://www.facebook.com/diycreators Subscribe & "RING the Bell": http://bit.ly/1PtWJEd Suscríbete a mi canal latino de Youtube: https://goo.gl/q4AbUf --------------------Materials Used------------------------- LED Wifi Smart Outlet http://amzn.to/2ELZ2oj LED Strip: http://amzn.to/2EQoBAo LED Channel and cover http://amzn.to/2EPasru Power Adapter http://amzn.to/2sPerP3 Power Switch http://amzn.to/2GF7Qc1 Rubber Bumper Cement and Play Sand (Local Home center) Wood Glue http://amzn.to/2EL3H9Y Water Dimension: (2) Wood Sides 42in(106.68cm)X2.5in(6.35cm) (1) Wood Top (This could vary, this should close up the top end) (1) Wood Inside 39 3/8in(100cm)X1.5in(6.35) Concrete Base 7in(17.78cm)X6in(15.24)X6in(15.24cm) ----------------------- Tools Used--------------------------- Miter Box http://amzn.to/2GCxKNF Bessy Clamps http://amzn.to/2BScroD Face Clamphttps://youtu.be/Is67ZeGAdqo Drill http://amzn.to/2CGhWHl 1/2in Masonry Bit http://amzn.to/2ESSjoN 1/4in Masonry Bit http://amzn.to/2EPTmd6 Optional: Table Saw http://amzn.to/2BOjZfF ------------Camera and recording equipment I use ------------ Camera - http://amzn.to/2qTajaY Mic - http://amzn.to/2qTtAZO Slider http://amzn.to/2ERyYEi My- Kit https://kit.com/Diycreators
Просмотров: 464995 DIY Creators
Table Saw Cabinet - DIY Tool Storage
 
07:00
I built this storage cabinet to go under the extension wing on my table saw. It utilizes some otherwise wasted space and keeps all my table saw related tools close at hand. Acme Tools - Top 10 Tables Saws for 2018: https://www.acmetools.com/blog/list-of-the-best-table-saws/ Free Project Plans: https://www.gunflintdesigns.com/tablesawstorage Other Storage Cabinet Builds- Dishwasher Cabinet: https://youtu.be/uzuVBBSGN0k Outfeed Table: https://youtu.be/Vq9vDkaAzc8 Workbench Storage: https://youtu.be/hCWvoFrDW-I Lathe Stand: https://youtu.be/rgD8jR9zj_g Support My Channel: https://www.patreon.com/gunflintdesigns My Website: http://www.gunflintdesigns.com Gunflint Designs T-Shirts: https://amzn.to/2JxkwD1 My Amazon Shop/Tools List: https://www.amazon.com/shop/gunflintdesigns Instagram: @gunflint_designs: https://www.instagram.com/gunflint_designs/ Tools: Table Saw: https://bit.ly/2J8pMg7 Dado Stack: https://bit.ly/2zhXKvx Dado Brake Cartridge: https://bit.ly/2JqtEuA Dado Insert Plate: https://bit.ly/2StPZLX Brad Nailer: https://bit.ly/2ABHxTY Right Angle Drill: https://bit.ly/2yP1Wnt Drill/Driver: https://bit.ly/2QnkeCp Drawer Slides: https://amzn.to/2JpDwVn
Просмотров: 7679 Gunflint Designs
22 - How to Make an Extreme Woodworking Bench for under $200
 
21:09
Plans available here: https://kingsfinewoodworking.com/collections/project-plans-for-sale/products/split-top-roubo-woodworking-bench If you would like to help support our channel, there are a number of ways. One way is direct support through Patreon: https://www.patreon.com/KingsFineWoodworking Another is by purchasing things you might need through our Amazon link. You pay the same and they pay us a small fee. https://www.amazon.com/shop/kingsfinewoodworking You can also help without spending anything, just by liking and sharing our videos. Thank you for your support. We love teaching the world to do woodworking. SPECS: 80 inches wide x 30 inches deep x 36 inches tall. All legs and rails are solid 4 inches x 5 inches. Bench Top is 5 inches thick. Weight is just under 500 pounds. Some items used for this build. Anything purchased through these links helps support our channel. Watco Danish Oil http://amzn.to/2udu1AW Transtint Red Dye http://amzn.to/2sfg2sO Zinsser Sealcoat http://amzn.to/2tEgyEZ Titebond III Glue http://amzn.to/2te9UT1 GRK 6” screws http://amzn.to/2ud6lMT ¼” roundover router bit http://amzn.to/2sAEnZf Forrest Dado King Dado Blade http://amzn.to/2ud90Gw Forstner Drill Bits http://amzn.to/2tzBMDa Bosch 12” Miter Saw http://amzn.to/2sArizi Some of the clamps used in this project: Clamping Straight Edge Saw Guide http://amzn.to/2eMYjXN Bessey Parallel Clamps http://amzn.to/2svVG2C Jorgensen Bar Clamps http://amzn.to/2tfGHqI Quick Grip Clamps http://amzn.to/2tFHaFE I think everybody needs a woodworking bench. But, I know that not everybody has the thousands of dollars it takes to buy a quality bench from a woodworking store. I also know most woodworkers want to build their own anyway. Many friends of mine are woodworkers and most of them are saving up the $2000.00+ that it takes to buy the 8/4 maple to build their own. Whether Roubo style or another. So I thought that I would present an alternative. This isn’t a new idea. Many YouTube woodworkers have done this before me. But, I thought that I would like to add my take on it. I went to my local home improvement “Big Box” store. I selected construction grade lumber. At my store they had a choice of a product they called whitewood, or Douglas Fir. The latter was kiln dried, and a much higher density and harder lumber so I chose that. Where you live will dictate what you buy. Many parts of the country will have southern yellow pine, which is a great choice for this. I took quite some time to sort through the bunk of lumber to ensure that I got straight pieces and pieces with as few knots as possible. I chose all 2x6’s, and I ended up with a workbench that was nearly 500 pounds. Very strong, very solid! Please follow along in the video to see what was built!
Просмотров: 399213 King's Fine Woodworking
How to Start a Cake Business from Home | CHELSWEETS
 
15:40
So many passionate bakers out there are eager to start selling their cakes, but don't know where to begin! Starting a cake business from home can be complicated...between local regulations/licensing, getting the necessary tools, developing a client base, and figuring out how to price your baked goods, the whole process can be a bit daunting. I walk through these key topics in this video, and also share what I learned when I stared my cake business. Below is a list of helpful links: Food Regulatory Requirements, listed by State: https://www.premierfoodsafety.com/staterequirements My favorite tools (links included!): https://chelsweets.com/2016/09/16/essential-cake-decorating-tools-a-beginners-guide/ Business license requirements by State: https://www.fundera.com/blog/business-license Insurance for Home Bakers: https://www.fliprogram.com/home-food-business-insurance Where I buy all my cake boxes and cardboard cake rounds: https://www.webstaurantstore.com/ If you want to know what products/brands I use in my kitchen, head over to my amazon storefront: amazon.com/shop/influencer-9e6f056e If you enjoyed this video and would like to see more, be sure to click the like and subscribe button! You can also see more of my creations here: INSTAGRAM: http://instagram.com/chelsweets WEBSITE: http://www.chelsweets.com FACEBOOK: https://www.facebook.com/chelsweets PINTEREST: http://www.pinterest.com/chelsweets
Просмотров: 183458 Chelsweets
Building 4 in 1 Workshop (Homemade table saw, router table, disc sander, jigsaw table)
 
13:12
All in one.! Table saw, router table, disc sander and jigsaw table.. Tüm atölye tek bir makinada birleşti.! Tezgah testere, freze tezgahı, disk zımpara makinası ve dekupaj testere tezgahı.. Box dimensions: 54x32x88 and table 65x98 cm. Plywood thickness of box 10 mm table 18 mm. Disc sander diameter 180 mm Kutu boyutları: 54x32x88, tabla 65x98 cm. Kutu kontrplak kalınlığı: 10 mm tabla kalınlığı: 18 mm. Disk zımpara ölçüsü: 180 mm
Просмотров: 7790225 Gökmen ALTUNTAŞ
Woodworking, The Samurai Workbench
 
10:57
A once in a lifetime woodworking project. It was one of the best, most rewarding experiences of my life. There is nothing I can't build now. I used Maple(top,trestles), Walnut(contrasting pieces), Garry Oak(legs)and Red Oak(vises). Get the plans here: http://samuraicarpenter.com/the-ultimate-workbench-plans Vice Hardware:http://www.leevalley.com/en/Wood/page.aspx?p=45114&cat=1,41659
Просмотров: 2751662 The Samurai Carpenter
Mobile Drill Press Base
 
00:40
Mobile Drill Press Stand. Very sturdy both on the wheels and the adjustable feet.
Просмотров: 401 Yannis Rouen
Xiaomi Smart Home Products Explained
 
08:13
In this video I'm explaining several Xiaomi Smarthome products like the Gateway (base-station) and various sensors and switches like the motion sensors and light switches. Want to buy these products? Xiaomi Smart home starter set : http://bit.ly/XMF_MHSS Aqara AC controller : http://bit.ly/XMF_AQ_AC Xiaomi Powerstrips : http://bit.ly/XMF_PWRSTRP Xiaomi Mi Rice cookers : http://bit.ly/XMF_Cooker Air Purifier 2 : http://bit.ly/XMF_XAP We'll have a look at how to install these through the Xiaomi Mi Home App and how to set up automation rules that we can easily program. This is the first of many Xiaomi explainer videos that I am planning to do. As not many of these products are available outside of China (yet) I think many people might be quite interested in seeing how Xiaomi is doing. If you enjoy these videos please subscribe to the channel to stay up to date of many more Xiaomi videos coming up soon.
Просмотров: 566883 xiaomify
$150 bike camper: DIY micro mobile home (downloadable plans)
 
12:34
Paul Elkins fell for micro-camping in 2002 when he toured the country in his cabover “stealth camper”. Sure he could make something more affordable, this year he began building a nomadic micro-shelter based on the Airstream design. [Downloadable plans: http://www.elkinsdiy.com/plans/ ] Using 4 recycled fluted-plastic campaign signs from a recent election, a $20 secondhand bike, 6 pine boards ($1 at Home Depot), screws, Duct tape and zip ties, he built his latest micro mobile shelter for only $150. Calling it a “micro Airstream bike camper”, it’s a 60-pound “home away from home”, complete with butane stove, bread-pan sink, counter, food storage shelving, clothes-storage bins, LED lighting, bed, windows, pee jug, bubble insulation, stereo with MP3 player, and a skylight made out of a 1 gallon plastic tub. Our mini-doc with Paul: https://www.youtube.com/watch?v=T1tV-ovGPyc More of Paul's videos: https://www.youtube.com/user/paulwelkins Mini Airstream bike camper: http://www.elkinsdiy.com/mobile-shelters/micro-airstream-bike-camper/ Original story: http://faircompanies.com/videos/view/150-bike-camper-diy-micro-mobile-home-downloadable-plans/
Просмотров: 9943389 Kirsten Dirksen
Modern Bench With A FLOATING TOP
 
12:51
I made a modern bench with a floating seat. Use my link to create your own website. To start your free trial and get 10% off your first purchase go to: http://squarespace.com/diycreators For more video Subscribe & "RING the Bell": http://bit.ly/1PtWJEd View all my plans https://gumroad.com/diycreators Find me on Social media Instagram: https://instagram.com/morediycreators Facebook: https://www.facebook.com/diycreators Help me make more Video: https://www.patreon.com/diycreators Grab A DIY T-SHIRT: http://bit.ly/2GoIGhm ---------------------------Materials Used------------------- (2) Sheets of 3/4in (19.05mm) plywood (1) 1/2in metal Rod [note: 2in (12.7mm) between the top and leg (2) Top - 58 5/8in X 22 7/16in (1489.1mm X 569.9mm) (4) Legs - 16in X 21in (406.4mm X 533mm) (2) Streacher - 6inX 55 3/4in (152.4mm X 1416.1mm) (6) Metal rods 5in (127mm) Epoxy https://amzn.to/2pznDmD ---------------------------- Tools Used---------------------- Table Saw - http://amzn.to/2HZJcU2 Clamps - http://amzn.to/2pDVGdF Sander - http://amzn.to/2GjixEM Shop-Vac (dust collection) http://amzn.to/2uitzFE Glue bottle - http://amzn.to/2uiv4DM Glude Applicator http://amzn.to/2I1bJsK Dust Mask https://rzmask.com/collections/m1-mask (use promo code diycreators for 10% off) ----------------Camera and recording equipment I use ------- Recording Camera - Nikon D5500 - http://amzn.to/2qTajaY Mic to record to computer - http://amzn.to/2qTtAZO Mic to Record to the Camera http://amzn.to/2CQ9xBk Lighting http://amzn.to/2ozoNxR SD Card http://amzn.to/2oHfsDr Camera Slider http://amzn.to/2ERyYEi Software Adobe Premiere (Video Edit) Adobe Photoshop (Photoshop) Sketchup (3D Modeling software) You can see my complete kit list here https://kit.com/Diycreators/video-recording-gear
Просмотров: 256921 DIY Creators
Finally some new equipment for the new shop
 
20:06
In todays video I finish the band saw table and also get some of our equipment for the new shop. It finally starts to sink in that this is all really happening. Shit just got real!!! thanks for watching Sorry for such a late upload, the first time I uploaded this video it wouldn't play so I ended up having to re edit the entire video haha A couple of years ago I started a small business out of my dads garage, now I'm busier then ever and trying to move into a big shop! Follow me around all day while I struggle to get things done and also build some crazy cars!! I will post a new video every day for as long as I can. You can watch my business grow from rock bottom to as high as I can take it. Thank you for watching and giving me all this support!! Ill see you tomorrow!!! Follow me on instagram @iamdan6598 For parts or business inquiries email drandcparts@yahoo.com For anything else email dansrodsandcustoms@yahoo.com Want to send me something? Dans Rods and Customs P.O. Box 204 Thomaston, CT, 06787
Просмотров: 34170 Dans Rods and Customs
Building a workshop (in a shed)
 
09:33
Anyone wondering where I've been...probably not...but I hope this video explains it! I can't believe I haven't put up a video in 8 weeks, but finally I have finished this new workshop! ---------------------------------------------------------------------------------------------------------------------------------------- All aerial shots in my videos are filmed using racing drones which are designed and manufactured by myself. If you wish to find out more, please visit my website where you can purchase your own carbon fibre racing drone frames! Stanton Frames: https://www.stantonframes.co.uk My Other Equipment: Main camera - http://amzn.to/2tqJKe7 Main tripod - http://amzn.to/2tqRjBt Secondary Tripod - http://amzn.to/2t1NkMh Microphone - http://amzn.to/2uuv9n0 Audio recorder - http://amzn.to/2v3mjcG Banggood affiliate: https://www.banggood.com/?p=LT0710618750201406EK Support my videos via Patreon: https://www.patreon.com/tomstanton Huge thanks to the following Patrons for supporting me: Bernard Gauweiler +2 others who have chosen not to be mentioned ---------------------------------------------------------------------------------------------------------------------------------------- Other Social Media Links: Instagram: https://www.instagram.com/stantonfpv/ FaceBook: https://www.facebook.com/Tom-Stanton-171292196234142/?fref=ts ---------------------------------------------------------------------------------------------------------------------------------------- Music: TheFatRat - "Time Lapse" https://youtu.be/OASl0UOf20A TheFatRat - "Fly Away feat. Anjulie https://www.youtube.com/watch?v=cMg8KaMdDYo
Просмотров: 33974 Tom Stanton
How To Build a Level Shed, tiny houses, barn foundation, platform by Jon Peters
 
12:12
Facebook: https://www.facebook.com/pages/Art-Home-by-Jon-Peters/312021729836 Website: http://jonpeters.com/ I'm building a new storage shed for my lawn mower and gardening tools. I've noticed that most sheds tend to rot from the bottom up and are often home to ground hogs and skunks. Because of these issues I'm taking a little more time and effort to prevent that from happening to this shed by building a solid base and level foundation. Hope you find this video helpful
Просмотров: 1606182 Jon Peters
How to Make Simple Plywood Dolly // Woodworking
 
09:58
I wanted to prototype a simple way to move plywood sheets easily! Subscribe to my channel: http://bit.ly/1k8msFr Second Channel: http://bit.ly/iltms-2 MORE PROJECTS, POSTS AND EVENTS http://www.iliketomakestuff.com TOOLS & SUPPLIES (affiliate links): https://kit.com/iliketomakestuff/plywood-dolly https://kit.com/iliketomakestuff/my-woodworking-tools https://kit.com/iliketomakestuff/shop-safety-gear Twitch Stream Every Wednesday @ 11am EST: www.twitch.tv/iliketomakestuff I WROTE A BOOK!! http://www.iliketomakestuff.com/makingtime Want to support ILTMS? Get exclusive content and more... http://www.iliketomakestuff.com/patreon BUY A SHIRT, STICKER, DIGITAL PLANS and MORE!! http://www.iliketomakestuff.com/store FOLLOW: http://twitter.com/iliketomakestuf http://www.twitch.tv/iliketomakestuff http://instagram.com/iliketomakestuff http://facebook.com/iltms This project was an exercise in problem solving. Everyone knows that moving around a full sheet of 3/4" plywood is awkward and cumbersome, but what if I could quickly make something to help with that problem? In the past, I've moved big pieces of furniture and equipment by using an old skateboard as a makeshift dolly. This method isn't really stable or easy to steer so I thought I'd make a device that is meant to help one person move big sheets of plywood. I thought the new plywood dolly would use the same basic idea; a small, wheeled plate that could firmly hold a sheet of plywood vertically while I pushed it around. I began my design process with a problem statement, "plywood is heavy and doesn't turn very well when using the skateboard as a dolly." Nailing down this core irritation will help direct the decision-making process once we started drawing out ideas. Each iteration has to address the problem statement or it shouldn't be considered as an option. The design had to be easy to use for 1 person, maneuverable, and simple to make; these are our design criteria. Because the concept behind this project was to quickly prototype a functional solution to the plywood problem, I didn't want to spend a lot of time 3d modeling an articulated part and over-analyzing the mechanics. I rummaged through my wood scraps and found a piece of oak that was just big enough for some casters that I had laying around and I used some left-over oak strips to act as the side walls. I drew out a really basic cam shape, a tadpole-type shape but with a hole for an axel offset from the center point of rotation. This allows the rounded head of the clamp to engage more and more as the lever is turned. The shape was cut out on the scrollsaw and then transferred that outline to another piece of oak that was then cut in the same way. I drilled the offset holes in the cams using the drill press and used my wood taps to create some threads in the side walls that would accept a 1/4-20 bolt to secure the cams to the base. We added 3 swiveling casters to the bottom for added maneuverability and it was all done. Although not one of the initial design criteria, we wanted the dolly to be able to hold two sheets of plywood. The side walls were spaced far enough apart to hold two sheets and the cam clamps were designed to be able to hold either a single our double sheets. When we tested the prototype, we placed the dolly under the front edge of a 4'x8' sheet of 3/4" plywood and I easily clamped it in place using my foot. I was able to move the whole around my shop wayyyy easier than I could by myself, it was great! While the dolly worked really well, I did note some things that could be improved upon. First, the dolly doesn't need two cams, one came can push the plywood up against the flat side wall all by itself. Second, I would add another caster which would held it not tip as much when you're putting it on. Lastly, I would make another one. Lifting the back edge of a full sheet is still pretty heavy, and adding another dolly to the back may really help. I hope you found some value in this simple problem-solving project. You may not need to move large sheet goods around your space, or maybe you're way stronger than me and this isn't an issue, but I hope you got something from this systematic approach to looking at a problem and addressing it in a way that saves time and effort in the long run. If you liked this simple shop accessory, check out more of my videos where I improve my workspace one little piece at a time. MUSIC: http://share.epidemicsound.com/iltms
Просмотров: 206566 I Like To Make Stuff
Why you should make useless things | Simone Giertz
 
11:58
In this joyful, heartfelt talk featuring demos of her wonderfully wacky creations, Simone Giertz shares her craft: making useless robots. Her inventions -- designed to chop vegetables, cut hair, apply lipstick and more -- rarely (if ever) succeed, and that's the point. "The true beauty of making useless things [is] this acknowledgment that you don't always know what the best answer is," Giertz says. "It turns off that voice in your head that tells you that you know exactly how the world works. Maybe a toothbrush helmet isn't the answer, but at least you're asking the question." Check out more TED Talks: http://www.ted.com The TED Talks channel features the best talks and performances from the TED Conference, where the world's leading thinkers and doers give the talk of their lives in 18 minutes (or less). Look for talks on Technology, Entertainment and Design -- plus science, business, global issues, the arts and more. Follow TED on Twitter: http://www.twitter.com/TEDTalks Like TED on Facebook: https://www.facebook.com/TED Subscribe to our channel: https://www.youtube.com/TED
Просмотров: 1723128 TED
5 Ways to Print on Wood | DIY Image Transfer
 
09:40
Wood print and DIY image transfer are great tools to customize your woodworking projects or to brand your work. I’ll show you 5 different ways to print on wood and the pro’s and con’s of each of them. Check out inexpensive laser engraving options on Amazon: https://amzn.to/2RXpfSY Thank you to Rockler Woodworking for use of the laser. You can check out their lasers here: http://bit.ly/rocklerlasers ======= Tools/Supplies Used (affiliate): Acetone - http://amzn.to/2yX0nEN Nitrile gloves - http://amzn.to/2zUjT2G Polycrylic - http://amzn.to/2nnstDd Acid brush - http://amzn.to/2iFjayd Liquitex gel medium - http://amzn.to/2zVTcL6 Foam brush - http://amzn.to/2yZtsiT Spray lacquer - http://amzn.to/2zToNwN ======= Join the Builder Club on Patreon and get Free Build Plans! https://www.patreon.com/fixthisbuildthat ======= SUBSCRIBE to my channel here: https://www.youtube.com/c/fixthisbuildthat?sub_confirmation=1 ======= FOLLOW ME on Social Media: Instagram - http://www.instagram.com/fixthisbuildthat Facebook - http://www.fb.com/ibuildthat Twitter - http://www.twitter.com/fixthisbuildtht Pinterest - http://www.pinterest.com/fixthisbuildtht ======= Brad Rodriguez PO Box 680433 Franklin, TN 37068
Просмотров: 904057 Fix This Build That
How To Build Wardrobe Extremely Fast and Simple - Woodworking Skills Very Smart of Carpenter
 
18:18
How To Build Wardrobe Extremely Fast and Simple - Woodworking Skills Very Smart of Carpenter Thanks for watching, subscribe & share! ► Subscribe to channel: https://goo.gl/8vZEZZ
Просмотров: 848944 Woodworking Tools
Building Roof truss systems for shed, barn, or a tiny house by Jon Peters
 
06:58
Facebook: https://www.facebook.com/pages/Art-Home-by-Jon-Peters/312021729836 Website: http://jonpeters.com/ I'm build a tool shed for my lawn mower and garden equipment. Most of the building practices can also be applied when building a tiny House. In this video I build the truss system for my shed, I decided to build the trusses before the wall because I wanted to use the shed platform / foundation for a level surface to design and build the truss system.
Просмотров: 1104740 Jon Peters
Home theater and dth whollsell market for Delhi  !! Business purpose market  !!
 
06:56
क्या बिजनेस करने की सोच रहे हैं वो भी कम लागम में, तो Home Theater और DTH का बिजनेस कैसा रहेगा! Market में इसकी मांग भी है आप यहां से होम थिएटर और DTH का whollsell सें भी कम रेट में खरीद सकते हैं और कम लागत में ज्यादा मुनाफा कमा सकते हैं जादा जानकारी पाने कें लिये विडियो देखें ******************* 1. Maltimetor (599) - http://amzn.to/2xtBMn5 2. digital tester - http://amzn.to/2g6rbLj 3. infoucs trabo 5 ( 7999 ) - http://amzn.to/2iL71Yj ++++++++++++++++++++ 1. Crompton 7WDF-CDL-BI 7-Watt B22 Base LED Bulb (Pack of 6, Cool Day Light) (670 Rs. )-http://amzn.to/2wt0BjE 2. Crompton 9WDF B22 9-Watt LED Lamp (Cool Day Light and Pack of 4) ( 399 Rs.) - http://amzn.to/2wnP6vh 3. Crompton B22 18-Watt LED Bulb (Pack of 2, Cool Day Light) ( 499 Rs.) - http://amzn.to/2iNfSZv 4. Crompton B22 LED-12WDF-CDL-BI 12-Watt LED Lamp (Pack of 2, Cool Day Light) (399Rs.) - http://amzn.to/2xCrD8w 5. 7WDF B22 7-Watt LED Lamp (Cool Day Light and Pack of 2) (149 Rs.) - http://amzn.to/2vPuRDz ******************** 6. Smartlight Rainbow LED smart bulb 7 W ( 1399 Rs.) - http://amzn.to/2wXxO9W 7. Syska B22 9-Watt LED Bulb (Pack of 2, Cool Day Light) (209Rs.) - http://amzn.to/2gokhNT ******** 8. DP Portable 30429 Rechargeable LED Emergency Light (329 Rs.) - http://amzn.to/2got1DN 9. - Shag Rechargeable Camping Lantern Solar LED Torch Emergency Lighting For Camping Home (449 Rs.) - http://amzn.to/2goPXmy @@@@@@@@@@@@@@@@@@@ What is the idea of ​​doing business in lesser cost, how the Home Theater and DTH business will be! There is also a demand in the market. You can buy home theater and DTH wholesalers as well at low rates and earn more profits at lower costs. Watch the video to get more information *************** Facebook following up - https://www.facebook.com/abhimanyu.kumar.948494 Twitter following up - Check out abhimanyu kumar (@kumar1581947): https://twitter.com/kumar1581947?s=09 Google Plus following up - https://plus.google.com/+kumar1581947 YouTube following up - https://www.youtube.com/user/kumar1581947 *******/*/********* This Video is Non PROMOTIONAL THIS VIDEO IS CREATED ONLY TO PROVIDE EDUCATION INFORMATION THIS CHHANEL IS NOT RESPONSIBLE FOR ANY PROFIT OR LOSS IN ANY KIND OF BUSINESS... ITS ALL DEPEND ON ON BUSINESS PLAN AND YOUR HARD WORK ...PLZ YOU MUST RESERCH YOURSELF BEFORE START ANY TYPE OF BUSINESS ..THIS video is only for Education purpose........ ............ Please shair jarur kare... जरूर देखें और शेयर करे अगर अच्छा लगे तो चैनल subscribe करना न भूले **////******
Просмотров: 243931 Smart World of Technology
XCOM 2 Tips: Base Building (Avenger Build Order Guide)
 
12:06
Welcome to my series of tips for XCOM 2. Today we'll talk about how to build out your base aboard the Avenger including build order, which improvements are optional, and how the position of certain facilities affects your game. Please feel free to share comments whether questions or suggestions. If you enjoy it, please consider giving it a like or share so others can find it. Subscribe: http://goo.gl/Y7MsRN Playlist: http://goo.gl/y3oc5V Follow me on Twitter: @Tap_Cat Channel: https://www.youtube.com/user/TapCatVids XCOM 2: The Story So far - Earth has changed. Twenty years have passed since world leaders offered an unconditional surrender to alien forces. XCOM, the planet's last line of defense, was left decimated and scattered. Now, in XCOM 2, the aliens rule Earth, building shining cities that promise a brilliant future for humanity on the surface, while concealing a sinister agenda and eliminating all who dissent from their new order. Only those who live at the edges of the world have a margin of freedom. Here, a force gathers once again to stand up for humanity. Always on the run, and facing impossible odds, the remnant XCOM forces must find a way to ignite a global resistance, and eliminate the alien threat once and for all. Key Features: • XCOM ON THE RUN: Take command of the Avenger, an alien supply craft converted to XCOM's mobile headquarters. New open-ended gameplay lets you decide where to guide your strike team, how to grow popular support, and when to combat enemy counter-operations. • RECRUIT RESISTANCE FIGHTERS: Five soldier classes, each with its own skill tree, let you create specific soldiers for your tactical plan. • TACTICAL GUERRILLA COMBAT: New gameplay systems offer more tactical flexibility in combat. Use concealment to ambush enemy patrols. Loot enemies for precious gear and artifacts. Rescue VIPs and save fallen comrades by carrying them to the extraction point. • A NEW BREED OF ENEMY: A diverse cast of enemies from powerful new alien species to the ADVENT, enforcers of the alien regime, offer a distinct tactical challenge. • RESEARCH, DEVELOP AND UPGRADE: Configure and build rooms on the Avenger to give XCOM new capabilities on the battlefield. Use your Scientists and Engineers to research, develop and upgrade weapons and armor to fit your preferred tactics. • EACH MISSION IS A UNIQUE CHALLENGE: Go on missions around the world, from wildlands to the heart of the alien-controlled megacities, to the depths of alien installations. There are virtually infinite combinations of maps, missions and goals. • CREATE CUSTOM MODS: Community-focused tools allow you to create your own campaign, tactical gameplay, aliens, classes, strategy game features, and share within the Steam Workshop. • ENGAGE IN HEAD-TO-HEAD MULTIPLAYER: Mix-and-match squads of humans and aliens and battle head-to-head on randomly-generated maps.
Просмотров: 299779 TapCat
How to Make a Desk with Hidden Wireless Charging
 
10:30
I partnered with Minwax and Lincoln Electric to build a desk with hidden wireless charging. I used woodworking and metalworking on this project with a walnut top and a tube steel welded base. This modern industrial computer desk has a nice simple desk feel but with tons of character including a copper metal bowtie inlay. #wirelesscharging BLOG: http://fixthisbuildthat.com/how-to-make-a-desk-hidden-wireless-charging ➤Thank you to Minwax: https://amzn.to/2vrATfk and Lincoln Electric: http://amzn.to/2pqJjS6 for sponsoring this video! ➤Tools/Supplies Used (affiliate): Minwax Polyurethane - https://amzn.to/2vrATfk Lincoln 210MP Welder - http://amzn.to/2pqJjS6 ISOtunes Bluetooth Earbuds - https://amzn.to/2Ioq0UI Wireless Charging Pad - https://amzn.to/2K1ZdJU Miter Saw Stand - https://fixthisbuildthat.com/mitersawstand Flip Top Tool Stand - https://fixthisbuildthat.com/fliptop 2:1 Clear Epoxy - https://amzn.to/2uVjUCv RIDGID 18V Router - https://amzn.to/2KDooHW RIDGID 18V Grinder - http://bit.ly/RIDGIDGEN5Xgrinder Circular Saw Track - http://amzn.to/2wHywsi Copper Bowtie - http://instagram.com/blackbirdmachinist/ ➤SUBSCRIBE to my channel here: https://www.youtube.com/c/fixthisbuildthat?sub_confirmation=1 ➤Join the Builder Club on Patreon and get Free Build Plans! https://www.patreon.com/fixthisbuildthat ➤FOLLOW ME on Social Media: Instagram - http://www.instagram.com/fixthisbuildthat Facebook - http://www.fb.com/ibuildthat Twitter - http://www.twitter.com/fixthisbuildtht Pinterest - http://www.pinterest.com/fixthisbuildtht
Просмотров: 2407885 Fix This Build That
HHO Generator - Water to Fuel Converter
 
09:12
For this project let's build a sexy looking generator that uses electricity to convert water into an extremely powerful fuel! Here's how to build an Oxy-Hydrogen generator from scratch. [✓] Solar Panels: http://amzn.to/2c69sAM [✓] 4” ABS clean out fittings: http://amzn.to/2cRYegg [✓] 3/8” Poly Tubing: http://amzn.to/2cqAyOS [✓] 100 grit sandpaper: http://amzn.to/2cr0ywC [✓] Clear silicone 1 caulk: http://amzn.to/2cg3Lle [✓] Rubber Mallet: http://amzn.to/2cg3i2b [✓] ABS Cement: http://amzn.to/2cg3a2K [✓] 1/4” 90 degree Elbow: http://amzn.to/2caxbOC [✓] 1/2” drill bit: http://amzn.to/2cg4LWf [✓] 18 Thread TAP: http://amzn.to/2cqCMxy [✓] Pipe Tape: http://amzn.to/2cRZLTS [✓] 3/8” Swivel Elbow: http://amzn.to/2cRLOsS [✓] 5/16 drill bit: http://amzn.to/2czNUxg [✓] Bench vice: http://amzn.to/2cg5dnE [✓] Stainless steel jam nuts: http://amzn.to/2cg70sJ [✓] Acrylic glue: http://amzn.to/2cRLDy3 I've been getting a lot of requests for build plans, so I made a 23 page .pdf file you can have for $20 (This helps compensate for the 3 days it took me to make them). You can get them here: http://bit.ly/HHOParts Everything you need to know should be in the video, but the plans have templates for the stainless steel plates, a parts list with SKU numbers, pictures, instructions, and expanded view diagrams of the systems, including an alternate "all ABS" option. Endcard Links: H2O Explodes: https://goo.gl/wMFjlz Power of the Sun: https://goo.gl/5ghwUx Fire Piston: https://goo.gl/BSl8QT Scorcher Frame: https://goo.gl/OFCaEr Social Media Links: Instagram: https://goo.gl/C0Q1YU Facebook: http://bit.ly/FBTheKingOfRandom Twitter: http://www.twitter.com/thekingofrandom Business Inquiries: For business and sponsorship inquiries please contact us directly: http://www.youtube.com/thekingofrandom/about WARNING: This project should not be attempted without adult supervision and adequate training. Misuse, or careless use, of tools or projects may result in serious injury, property damage, and/or death. Use of this video content is at your own risk. This is not a "free energy" device, "over unity" device, or a claim to be the solution to the worlds energy crisis. This is a project I did to experiment with the electrolysis of water, and the resulting gasses collected. Music By: Kevin Macleod (Breakdown) http://incompetech.com/ Project Inspired By: "Smack's Booster": http://www.free-energy-info.co.uk/Smack.pdf Project History & More Info: The generator requires electricity to electrolyze H2O (water) into gas. The resulting mixed gas is sometimes referred to as Oxy-Hydrogen gas, which is 2 parts Hydrogen (H2) and 1 part Oxygen (O2). I typically hook this up to my car battery while the vehicle is running, so the alternator takes most of the load. On 12 volts I get about 1.5 liters/minute, but when I want to make the gas faster, I hook 2 car batteries in series for 24 volts, and this exponentially increases the gas production to over 5 liters per minute. Current draw seems to be around 20-50 amps depending on whether you use 12-24 volts. High current draws mean the electrolyte heats up, and if left too long the plastic can warp or melt causing structural failure. Some people ask why the plates aren't all electrically connected. The plates that aren't connected are called "floater" plates, or "neutral" plates. There is too much information to post about them here, so do a google search, or check out websites like http://www.hho4free.com/neutral_plates.htm for an in depth explanation of the theory. I used KOH as my electrolyte because research suggested it was the best. I haven't experimented with other electrolytes, but have heard that salt, sodium hydroxide, vinegar, etc could work, but will dirty and may corrode the plates. Potassium Hydroxide keeps the system clean, however, it is caustic, so be careful if you choose to use it. You can probably get away with about 2-4 teaspoons of KOH per 6 liters of water. This system produces an extremely powerful OxyHydrogen gas. When the gas is used, it simply turns back into water, and that's good for the environment. However I believe it takes more electric energy to produce the gas than is obtained from the gas. This device merely converts the energy from one form to another, with given losses. As long as you have enough electricity, the amount of water already in this system is enough to produce thousands and thousands of liters of fuel. Some people say this is the fuel of the future. Either way, it's a very powerful gas! If you need more information, or want to purchase build plans for this design, you can get them here: http://bit.ly/HHOParts
Просмотров: 8136953 The King of Random
Easy and Cheap Professional Home Music Recording Studio Setup for Beginners in Hindi (2016, India)
 
11:21
Best Audio Interfaces in 7,999/- : https://bit.ly/2PURgNL Best Condenser Microphones in 4,999/- : https://bit.ly/2T4zbeO Best Guitars in 4,999/- : https://bit.ly/2qHVDgZ --------- Want to Learn More? Important Links from my Music Learning Website: https://www.musicalmahesh.com ----------- 1. How to Connect Focusrite Interface to Computer: https://goo.gl/x572Pb 2. 8 Essentials for any Home Recording Studio: https://goo.gl/3i4ak4 3. Reference Headphones vs Reference Monitors: https://goo.gl/YkHnCh 4. Best Studio Bundles (All in 1): https://goo.gl/qUBvSB 5. Best USB microphones to Buy for Beginners: https://goo.gl/ib8ywy 6. Top Microphones for Karaoke Singing: https://goo.gl/ILxot1 7. 5 Low Budget Audio Interfaces: https://goo.gl/YWGWfL 8. Top 10 MIDI Controllers: https://goo.gl/KcFRG5 9. Best Keyboards for Performing Live: https://goo.gl/5UFx3P 10. How to Setup Home Recording Studio: https://goo.gl/cNeaK3 ------------ Shop Indian Bestseller Music Instruments at my site: http://www.musicalmahesh.com/shop-best-seller-music-instrument-accessories/ ---------- Watch my Latest Original Song "Ik Tera Naam Hi, 2017" at: https://youtu.be/wNtpVf6Hmhw (Valentine's Day Special | 2017) Learn More at Website: http://www.musicalmahesh.com/learn/ Find good home recording gadgets suggestions at my website: http://www.musicalmahesh.com/shop "This Video is Like a Gift for All (Nearly) 17000 Subscribers." Making personal Home Music Recording Studio with a Professional Quality is always a dream for many beginner and aspirant singers and musicians. In this tutorial the simple steps and a guideline for setting up Home Music Recording Studio is explained to the viewers, specially, those who are beginner and aspirant musicians, cover artists and singers. This tutorial is fully in Hindi. ----------- In this tutorial you will learn: 1. How to setup a Home Music Recording Studio in India (Hindi) 2. Home Music Recording Studio Equipments Suggestions 3. What are the Essentials of a Home Music Recording Studio for a Professional Quality 4. Things to explore in the gadgets you are planning to purchase for setting up Personal Song Recording Studio 5. Cheap Rates Solution for Building Home Recording Studio in India ------------- Disclaimer: "All the items suggested in this video are Exclusively Suggestions Only. You are free to alter the products type and brand as per your personal requirement and budget. The price shown in this tutorial are either taken from Various sites like Amazon, Bajaao etc. or are based on the average prices in the market as in Jul 2016 in Delhi" ---------- Please Subscribe Musical Mahesh Channel at http://bit.ly/1ZA9sqT For: -Own Composition Songs Hindi -Hindi Bollywood Songs Easy Guitar Lessons For Beginners: Learn Chords, Strumming, Tabs, Guitar Classes -Learning Music Basics/Theory For Piano/Guitar Beginners In Hindi -Tutorials For Beginners In Hindi: Learn Mixing, Recording, Editing, Effects VST Plugins, Mastering Free Video Classes DAW -Audacity, FL Studio, Cubase, Melodyne, Autotune, Ableton Live, Video-Pad Classes In Hindi (Coming Soon) -Music Recording Instruments: Audio Interface(Sound Card), Microphone, MIDI Keyboards/ Controllers etc. Reviews -A Video Tutorials Series on: How To Compose A nice Song/Melody in Hindi ------------ Subscribe Musical Mahesh Free Now Here: http://www.youtube.com/channel/UCvPi6VoWdrDOiHLpQKEYuCA?sub_confirmation=1 ----------- Please Like my page for Messaging: http://www.facebook.com/MusicalMahesh ----------- Also Do Share, Like, Comment And Subscribe Musical Mahesh For Upcoming Tutorials And Hindi Songs. ----------- Spreading Music; Musical Mahesh --------------------------------------
Просмотров: 433565 Musical Mahesh
DIY hot tub of wood, made with FELDER® woodworking machines
 
28:52
Built together with us this highlight for fun, joy and relaxation, In this do-it-yourself video we will show you step by step how easy it is to produce a wooden bathtub with our Felder woodworking machines. Plan and planing software can be found here: http://felder-group.com/index/promolandingen We use the Felder combination machine CF 741 SP for this project. tensioning strapes and heater - http://www.sauna-badetonne.de/ http://www.felder.at http://www.hammer.at http://www.format-4.com http://www.felder-group.com http://www.number-1-mm.com
Просмотров: 1375827 FELDER GROUP TV
DIY How to Build 12' x 24’ Mega Shed Shack Tiny House Garage Foundation Footers Framing Roof Truss 1
 
06:09
Watch in 4k - Full Demo of old smaller shack and the complete rebuilt of a new large mega shed 12 feet x 24 feet with 7.5' high walls and A-frame colonial style roof. 4 windows 1 standard door and a custom 8' x 6.4' roll up garage door to allow access and storage of Hyperdrive Hustler Super Z Zero Turn mower and John Deere Ride on as well as many other tools and full workshop, and possibly a small living quarters! PART 2: https://www.youtube.com/watch?v=FXQG-lWwuYM&t=0s PART 3: https://youtu.be/KfdpB2oB7FY Heavy Duty Shed Ramp Build: https://youtu.be/DGOPRee16jA If you have any Questions, Comments or Compliments on this video or if you would like to know specifics on how to build your own 12 foot x 24 foot storage shed or tiny house feel free to leave them below! ***If anyone Knows the first Song Title &/or Artist, Please tell me so I can give credit!*** Please Subscribe to stay with us on this and many other projects, soon you will see the the window & doors install and full wall and roof sheathing and finishing!
Просмотров: 299064 LivingTheGoodLife
A simple guide to electronic components.
 
38:06
By request:- A basic guide to identifying components and their functions for those who are new to electronics. This is a work in progress, and I welcome feedback from you guys on whether I should break it down into more manageable chunks. I've kept the maths to a minimum, since it can be off-putting to someone just getting started in electronics. The idea of this video is to slot in some more of the jigsaw pieces involved in learning electronics, when you start to recognise components, but aren't quite sure what they are or what they do. It's tricky to squeeze even the basics into a single video, and I've just realised how long this one is (and why it took all night to upload). If you enjoy my videos you can support the channel with a dollar for coffee, cookies and components at https://www.patreon.com/bigclive
Просмотров: 2670544 bigclivedotcom
Inventory management for small business. A simple how to tutorial
 
05:59
Inventory management for small business is often an after thought. Find out why this critical step can save you some serious money and how you can implement the latest technologies for almost without a massive budget. This step by step guide shows you how we manage 1000's of SKU's everyday without any errors. For more information visit http://www.davidhay.org/qr-codes-quick-easy-inventory-tracking/ Let’s get this out of the way: the subject I’m going to cover today is a polarizing one. Like with all topics, some people will be on the bandwagon, on the fence, or dragging their feet kicking and screaming; this particular subject attracts discussions of the kicking and screaming variety. I’m talking about QR codes. There are many who think that the QR code is dead, and they wouldn’t be wrong. We could write an entire blog post about why QR codes suck, but they’re still the fastest way to transmit large amounts of information. That’s what makes it such a great platform on which to base your asset management and inventory tracking. ======================== Subscribe to my channel https://www.youtube.com/subscription_center?add_user=DavidHaydotOrg ======================== I offer professional consulting services starting at $80 per hour.
Просмотров: 339593 David Hay
Stranded Deep Gameplay - "THE ULTIMATE RAFT CHALLENGE!!!"  - Let's Play Walkthrough
 
13:57
Welcome to my Hermit's Look at Stranded Deep! This is a PC gameplay walkthrough in 1080p HD. Don't forget to SUBSCRIBE! New videos DAILY! http://www.youtube.com/user/generikb?sub_confirmation=1 About Stranded Deep: Take the role of a plane crash survivor stranded somewhere in the Pacific Ocean. Experience terrifying encounters both above and below an endless environment. Come face to face with some of the most life threatening scenarios that will result in a different experience each time you play. Scavenge. Discover. Survive. --- Generate an Infinite Number of Procedural Worlds - Explore Pacific islands, reefs, and bottomless ocean trenches filled with detailed biomes! No two worlds are the same - You can generate a completely new and randomized world at any time. You can also mix your own maps created with the map editor in with the procedurally created maps in the world for a more customized experience. If you feel like sharing, you can even share your world seed with other players. * Please note, currently the generated world size is limited to 6.25km2 but the final world size will be much larger. Dynamic Weather and Day-Night Cycle - Struggle to navigate stormy seas or enjoy basking with a coconut on a sunny afternoon. Unique Physically-based Crafting System - Harvest resources to create equipment by combining them together in the physical world - no crafting slots! Unique Physically-based Building System - Settle on an island and construct a shelter or venture the seas with your own built raft. Detailed Survival Aspects and Interaction - Manage your vitals of hunger, thirst, blood, and health against the harshness of mother nature. Random Loot and Collectables - Search sunken shipwrecks and islands for interesting and rare equipment. Hunting and fishing - Spear small animals in the shallows or risk the depths with a spear gun in search of larger meals. Starve an island of resources or maintain and manage its growth. ============================================= Outro Music by Elybeatmaker! Full song here: https://youtu.be/IKYybTC-gu4 Intro Animation by Fultron! http://www.fultron84.co/ Support your favorite Hermit!!!! ● NEW STORE! http://shop.generikb.com/ ● Twitter http://www.twitter.com/generikb ● Facebook http://www.facebook.com/generikb ● Livestream http://www.twitch.tv/generikb =============================================
Просмотров: 716464 Generikb